| Time |
Presentation & Author(s) |
| 7:30 |
Registration (All / Mingle) |
| 8:20-8:30 |
Welcome: Prof. Rehan Umer |
| 8:30 - 9:20 |
Keynote: Prof. Suresh G Advani, Role of modeling and simulation in the development and application of digital twin for liquid composite molding processes (University of Delaware, USA) |
| 9:20- 9:40 |
Multiscale impregnation modeling using deep learning (Baris Caglar, TU Delft, Netherlands) |
| 9:40 - 10:00 |
Finite element-assisted analysis of through-thickness impregnation behavior of polymer composite reinforcement textiles (Miro Duhovic, Leibniz Institute, Germany) |
| 10:00 - 10:30 |
Coffee Break |
| 10:30 - 10:50 |
Improved finite volume multiphase flow simulation model for strongly inhomogeneous porous media (Christof Obertscheider, University of Applied Sciences Wiener Neustadt, Austria ) |
| 10:50 - 11:10 |
Stokes-darcy fluid flow simulations within 3D interlock fabrics with capillary effects – experimental input influence and comparison with experimental output (Pierre-Jacques Liotier, IMT Mines Ale, France) |
| 11:10 - 11:30 |
Numerical simulation for compression moulding of carbon fibre sheet moulding compound (Connie Qian, University of Sheffield, UK) |
| 11:30 - 11:50 |
Comparison of different dual scale methods for numerical permeability prediction (Tim Schmidt, Leibniz Institute, Germany) |
| 11:50 - 12:10 |
An FE implementation of coupled resin flow and preform deformation linked to residual stress and cure-induced distortion analysis in Abaqus (Mohammad Rouhi, RISE Research Institutes of Sweden) |
| 12:10 - 12:30 |
The application of a numerical tool for smart in-situ sensing of defect features in large scale infusions (Jack Davies, University of Bristol, UK) |
| 12:30 - 13:30 |
Lunch |
| Time |
Presentation & Author(s) |
| 13:30 - 14:20 |
Keynote: Assoc. Prof. Yu Dong, Mechanical Behaviour of Recyclable 3D Printed Polymer Composites Using Digital Light Processing (Curtin University, Australia) |
| 14:20 - 14:40 |
Numerical simulation of large format additive manufacturing to enhance layer adhesion and reduce warpage in glass fiber reinforced ABS structures (Pablo Catello, Universitat Politècnica de València, Spain) |
| 14:40 - 15:00 |
Simulation-driven quality assurance for laser assisting automated fiber placement processing of carbon fiber thermoplastic composites (Samuel Requile , Coriolis Composites, France) |
| 15:00 - 15:30 |
Coffee Break |
| 15:30 - 15:50 |
Fully biodegradable polymeric composites for FDM 3D printing – Effects of reinforcing particle size and volume on flow and properties (Chamil Abeykoon, University of Manchester, UK) |
| 15:50 - 16:10 |
Considerations for layer-by-layer manufacturing with snap-cure thermoset prepregs (Axel Wowogno, University of Bristol, UK) |
| 16:10 - 16:30 |
Original concepts of ply drop configurations for improved mechanical performance in tapered composites (Erfan Kazemi, Imperial College London, UK) |
| 16:30 - 16:50 |
On-line pneumatic compaction system for consolidation on a powder polymer towpreg processing line (Hanisa Hasrin, Sheffield University, UK) |
| 16:50 - 17:10 |
Investigating the energy absorption performance of additively manufactured bioinspired honeycomb structures (Muhammad Khizer Ali Khan, Khalifa University, UAE) |
| 17:10 - 17:30 |
Reconstruction-based approach for enhancing filament winding inspection in hydrogen storage tank manufacturing (Samee Ullah Khan, Khalifa University, UAE) |
| Time |
Presentation & Author(s) |
| 8:00 |
All / Mingle |
| 8:30 - 9:20 |
Keynote: Prof. Simon Bickerton, Plasma enhanced processing of polymer-polymer and fibre-polmer thermoplastic composites (The University of Auckland, New Zealand) |
| 9:20- 9:40 |
Process optimization of composite pressure vessel using liner-assisted resin transfer molding of reactive thermoplastic resin (Biltu Mahato, Luxembourg Institute of Science and Technology, Luxembourg) |
| 9:40 - 10:00 |
Sustainable composite materials for marine applications (Mohammed Loukil & Marie Jonsson , Linkoping University, Sweden) |
| 10:00 - 10:30 |
Coffee Break |
| 10:30 - 10:50 |
Formulating and multi-processing of thermally conductive peek composites with selective integration of ceramic fillers for advanced aerospace applications (Burcu Sanar Okan, Sabanci University, Turkey) |
| 10:50 - 11:10 |
Influence of the surface modification of a basalt fiber on the in-plane permeability at two scales: the tow and the fibrous preform (Pierre-Jacques Liotier, IMT Mines Ale, France) |
| 11:10 - 11:30 |
Vacuum-assisted through-thickness melt impregnation of thermoplastic composites (Martin Lambrechtse-Reid, The University of Auckland, New Zealand) |
| 11:30 - 11:50 |
Enhancing sustainability in large format additive manufacturing: real-time rheological monitoring and in-situ flow control for recycled ABS-GF (Javier Bas Bolufer, Universitat Politècnica de València, Spain) |
| 11:50 - 12:10 |
Mechanical and self-sensing performance of selectively laser sintered CNT/PA12 honeycombs subject to monotonic and cyclic compression (Andreas Schiffer, Khalifa University, UAE) |
| 12:10 - 12:30 |
Deconsolidation in thermoplastic laminates under infrared radiations (Regis Vaudemont, Luxembourg Institute of Science and Technology, Luxembourg) |
| 12:30 - 13:30 |
Lunch/Poster Session |
| Time |
Presentation & Author(s) |
| 13:30 - 14:20 |
Keynote: Prof. Veronique Michaud, Energy efficient processing of composites by frontal polymerization of epoxies (EPFL, Lausanne, Switzerland) |
| 14:20 - 14:40 |
Machine learning based flow velocity field prediction in large 3D fibrous microstructures (Stefano Cassola, Leibniz-Institute, Germany) |
| 14:40 - 15:00 |
Machine learning proposal for fiber orientation prediction in large format extrusion additive manufacturing (Cesar Garcia, Universitat Politècnica de València, Spain) |
| 15:00 - 15:30 |
Coffee Break |
| 15:30 - 16:10 |
Lab Tours |
| 16:10 - 16:30 |
Numerical parametric study of a wavy thin channel thermoplastic melt impregnator for carbon fibre reinforced prepreg production (Maximilain Pitto, The University of Auckland, New Zealand) |
| 16:30 - 16:50 |
Multiphysical process modeling approach for vacuum bag only prepregs: integration of resin flow, consolidation and heat transfer (Hatice Sas, Sabanci University, Turkey) |
| 16:50 - 17:10 |
A rate dependent visco-hyperelastic model for compaction response of 3D woven fabric (Siddhesh Kulkarni, Khalifa University, UAE) |
| 17:10 - 17:30 |
Manufacturing, characterization, and modeling of graphene-based multifunctional composites (Noora Alahmed, Khalifa University, UAE) |
| 18:30 |
Banquet (Fairmont Hotel Abu Dhabi) |
| Time |
Presentation & Author(s) |
| 8:00 |
All / Mingle |
| 8:30 - 9:20 |
Keynote: Prof. Prasad Potluri, Textile preforming optimised for infusion with nanoparticles (University of Manchester, UK) |
| 9:20- 9:40 |
Hydrogen permeability of carbon fiber reinforced casted polyamide 12 (Patrick Nowakowski, Faserinstitut University of Bremen, Germany) |
| 9:40 - 10:00 |
An integrated permeability testing device for textile reinforcements under high temperature (Bin Yang, Wuhan University of Technology, China) |
| 10:00 - 10:30 |
Coffee Break |
| 10:30 - 10:50 |
Distributed fibre optic sensing for real-time monitoring of VARTM manufacturing and processing of composite laminates (James R. Davidson, Sheffield University, UK) |
| 10:50 - 11:10 |
Dynamic wetting of polymers on fibers: effect of temperature (Monica Pucci, IMT Mines Ale, France) |
| 11:10 - 11:30 |
Modelling the resin flow through fibres during resin transfer moulding (Shanthar Rajinth, University of Manchester, UK) |
| 11:30 - 11:50 |
Flow front monitoring and permeability analysis of pneumatically spliced woven fabrics (Fayyad Amod, Sheffield University, UAE) |
| 11:50 - 12:10 |
Performance Evaluation of discarded aerospace prepregs for alternate applications (Sanjeev Rao, Khalifa University, UAE) |
| 12:10 - 12:30 |
Bonding performance of plasma-treated LDPE/GNP liners with CFRP for high-pressure hydrogen storage systems (Jabir Ubaid, Khalifa University, UAE) |
| 12:30 - 13:30 |
Lunch |
| Time |
Presentation & Author(s) |
| 13:30 - 14:20 |
Keynote: Prof. David May, Composite process development: studies on permeability as the basis for a holistic research methodology (Faserinstitut, University of Bremen, Germany) |
| 14:20 - 14:40 |
Iso-standardized permeability test requirements are on the limit of the achievable measurement precision (SV Lomov, KU Leuven, Belgium) |
| 14:40 - 15:00 |
A reference porous medium for calibrating through thickness permeability setup (Mostafa Nikzad, Swinburne Instutute of Technology, Australia) |
| 15:00 - 16:15 |
Benchmarking and Standardization (Stepan Lomov, Veronique Michaud, David May, Tim Schmidt, Elena Syerko, Ana Yong) |
| 16:15 |
Abu Dhabi Tour |
Note: Each presentation is of 17 min duration with 3 min for Q&A (20 min total). The presenter should bring their slides on a USB drive or bring a laptop with HDMI connectivity or adapter. The prefered slide aspect ratio is 16:9
